Edco Sky Devil .65
We produced the Edco Sky Devil in the early 1980's for another company. This version had many parts which differed from the original. These were stamped under the mounting lug with serial numbers like "T&D 123". Both original and newer versions were milled clean on the bottom of the lugs. Our current production is (in most respects) identical to the original, so if you have either one of these you may wish to call before placing an order to be sure you'll receive the correct parts.

The differences between the original are; the exhaust outlets are milled out to clean up the casting on the original, ours are cast clean and completely red anodized; cylinder liner is chromed on ours; back cover top ears match the case on ours as the original dipped on the top; used a shorter K61 connection rod on the 1980 version and crankshaft has a smaller .246 diameter crank pin.

Hassad Bluestreak .65
Ira Hassad designed the Edco Sky Devil, so there are a lot of similar parts in the two engines. All our parts should fit the original.